SHELL ALVANIA GREASES RL : Jakarta Oil & Grease 021-45624919
Shell Alvania Greases RL ,Shell Alvania RL2 and Shell Alvania RL3 are smooth-textured, amber colored, non-EP, lithium soap thickened greases. These greases are also inhibited with additives that promote long service life and provide excellent lubrication and corrosion protection. Alvania Greases RL are excellent as general plant and electric motor bearing lubricants. Shell Alvania® Grease RL 2 is readily pumpable in pressure grease dispensing systems.
Recognizing the trend toward the use of low-noise greases in general plant and electric motor bearing applications, Shell Alvania Greases RL ,Shell Alvania RL2 and Shell Alvania RL3 are formulated with non-crystalline additives to reduce the hard particles that can lead to noise. The greases are tested to meet low-noise bearing requirements.
Applications
small and large bearings used in electric motors in consumer applications where low noise properties are desired
factory-fill where the bearing manufacturer requires a low noise grease
Proper grease selection depends upon many factors, including bearing size, speed, temperature, load and method of application (hand gun, centralized systems). The bearing lubrication guide shown below will assist in this selection.
| Antifriction Bearing Lubrication Guide | ||
| Operating Temperature, °F | Bearing SpeedFactor * | RecommendedShell Alvania® RL Grease |
| -30 to 100 | 150,000 to 300,000 | 2 |
| 0 to 150 | 0 to 75,00075,000 to 150,000
150,000 to 300,000 |
22
3 |
| 100 to 275 | 0 to 75,00075,000 to 150,000
150,000 to 300,000 |
23
3 |
*The bearing speed factor is the bearing bore measured in millimeters multiplied by the bearing shaft speed measured in revolutions per
minute. For the purpose of converting millimeters to inches, one inch equals 25.4 millimeters.
Features/Benefits
- excellent lubrication
- excellent corrosion protection
- promotes long service life
- readily pumpable in pressure grease dispensing systems (Shell Alvania Grease RL 2)
Typical Properties of Shell Alvania Greases RL
| TestMethod | |||
| Product Code | 71045 | 71046 | |
| NLGI Grade | 2 | 3 | |
| Appearance | Visual | Amber, Smooth | Amber, Smooth |
|
Base Oil Viscosity: @40 °C, cSt @100 °C, cSt |
D 445D 445 | 989.4 | 989.4 |
| Penetration, dmmWorked, 60X
Worked, 10,000X, % Change |
D 217 | 2847 | 2408 |
| Dropping Point, °F | Mettler | 385 | 385 |
| Rust Prevention | D 1743 | Pass | Pass |
| Copper Corrosion | D 4048 | 1b | 1b |
| Bomb OxidationPressure Drop @100 hrs, psi | D942 | 5 | 5 |
Shell Alvania Greases RL ,Shell Alvania RL2 and Shell Alvania RL3
RODUK ROCOL ROCOLROCOLROCOLROCOLROCOL ROCOLROCOL PRODUK BESTOLIFE BESTOLIFEBESTOLIFEBESTOLIFEBESTOLIFE BESTOLIFEBESTOLIFEAnother Product oil & parts
- Komatsu PC03-1, PC03-2 Excavators Parts
- Komatsu Excavators Parts
- Komatsu Parts | Excavators, Loaders, Bulldozers, Dump Trucks, Forklift
- Mobil SHC 526 Synthetic Hydraulic Oils
- Mobil SHC 525 Synthetic Hydraulic Oils
